Make Bird Feeder Cup Saucer

Make Bird Feeder Cup Saucer. Check it to make sure the cup doesn’t slide left or right. Here’s how i made my tea party themed bird feeder.

Tea Cup Bird Feeder Vintage Cup and Saucer by
Tea Cup Bird Feeder Vintage Cup and Saucer by from www.etsy.com

Step 1 drill a hole on the side of the teacup opposite the handle. Some silicone will squish out the sides. Then lower onto the saucer.

All Of Them Are Supposedly Suitable For Sticking Ceramic, But None Seem To Work.


Angle it slightly so the seeds can “pour” out. First, sand a spot in the middle of the bottom of the saucer. Put a little glue on the saucer where you the want the lip of the cup to connect.

I Have Tried Several Glues To Stick A Cup To Its Saucer.


(it’s easier to sand the saucer now before the tea cup is glued to it.) turn the saucer right side up. It measures 8.75 inches in diameter and has a height of 7.75 inches. Where the teacup goes on the saucer totally depends on the shape of the teacup and how it fits onto the saucer.

Attach The Cup To The Saucer And Put A Small Layer Of Glue Around The Edge Of The Cup To Ensure No Moisture Gets In Between The Cup And Saucer Once Outside.


An easy to make hanging teacup bird feeder. The attached cup is about 4 inches in diameter and has a rim of approximately 4.75 inches in length. #2) squeeze some of the glue onto the edge of your saucer.

Make Sure The Teacup And Saucer Are Clean.


They're mounted on a rod that you stick in the ground. Let set and dry according to the adhesive directions. Spread a thick layer of adhesive on the teacup and place it on the saucer.

Tilt Up The Cup Where It Meets The Plate And Apply The Epoxy, Then Carefully Put The Cup Back In Place To.


Step 1 drill a hole on the side of the teacup opposite the handle. Making a cup and saucer bird feeder? 3) set the cup on top.

Comments

Popular posts from this blog

Make Your Own Bird Feeder Nz

How To Build Your Own Outdoor Putting Green

Best Outdoor Security Cameras